NK-15XZ-Ⅱ X-Ray Image Intensifier
1. Brief Introduction:
NK-15XZ-Ⅱ X-Ray Image Intensifier is the electronic output equipment which converts the x-ray image into the visible light image. It is installed on the x-ray TV system, which is applicable to the x-ray fluoroscopy and radiograph.
NK-15XZ-Ⅱ X-Ray Image Intensifier is composed of x-ray image multiplier tube, tube container, high voltage power supply which is set inside of tube container and the low voltage power supply which drives the high voltage power supply.
The nominal entrance field of view of NK-15XZ-Ⅱ X-Ray Image Intensifier is 150mm (6inch), which is mainly application to C-arm, lithotrity and industrial detection X-ray machines.
4. Main Technological Parameters:
(1) Photoelectric Performance:
Input screen size: 150mm
Effective entrance field of view size: 150mm
Output image diameter: 15mm
Limiting resolution: 48Lp/cm
(2) Low Voltage Power Supply Performance Parameters:
Input voltage: 86V ～ 265V
Input power supply frequency: 50Hz/60Hz
Output voltage: 24V±0.5V
Output current (effective value): 1.5A
5. Standard Configuration:
① 24V power supply box: 1 piece
② 24V power supply cable: 2 pieces
③ Ground wire: 1 piece
④ Image intensifier: 1 piece
⑤ Service manual: 1 copy
⑥ Quality Certificate: 1 copy